Pneumatic Components

Tempest® Pneumatic Filters

Tempest manufactures a complete line of FAA-PMA approved aviation pneumatic filters.  Tempest pneumatic filters use .3-micron filtration elements which offer superior protection against outside contaminants, such as dust and other cabin pollutants.  Using Tempest pneumatic filters and replacing them at proper intervals will keep your system clean and improve pneumatic system performance.

 

Pneumatic Filter PDF Application Guide

Information contained in this application data is for reference only. Although great effort has been made to ensure accuracy and completeness, Aero Accessories/Tempest® assumes no responsibility for the information contained within this document. Responsibility for airworthiness of aircraft, including the installation of correctly selected approved replacement of parts lies with the aircraft owner/operator per FAR 91.163, FAR 121.363, FAR 123.45, FAR 127.131 and FAR 135.143 (a). Please refer to FAA or engine/airframe/propeller manufacturers’ parts listing for approved part numbers for each application.  Tempest brand products are manufactured by Aero Accessories, LLC.

Tempest® High Flow Fittings

Tempest fittings are FAA-PMA approved and are specially designed to reduce pressure drop and improve pneumatic system performance.  Tempest high flow fittings are manufactured of light weight thin wall steel tubing, allowing our fittings to have smooth tube bends that permit even air flow through the fitting with minimal restrictions.  Fittings with bends from 45 to 160 degrees or straight are available.  

Tempest® Pneumatic Valves

Tempest pneumatic valves are FAA-PMA approved and are offered in both new and overhauled.  These valves are lightweight and designed to accurately control the air pressures in your pneumatic system. 

 

Check Valves PDF Application Guide

Information contained in this application data is for reference only. Although great effort has been made to ensure accuracy and completeness, Aero Accessories/Tempest® assumes no responsibility for the information contained within this document. Responsibility for airworthiness of aircraft, including the installation of correctly selected approved replacement of parts lies with the aircraft owner/operator per FAR 91.163, FAR 121.363, FAR 123.45, FAR 127.131 and FAR 135.143 (a). Please refer to FAA or engine/airframe/propeller manufacturers’ parts listing for approved part numbers for each application.  Tempest brand products are manufactured by Aero Accessories, LLC.

Deice Valves PDF Application Guide

Information contained in this application data is for reference only. Although great effort has been made to ensure accuracy and completeness, Aero Accessories/Tempest® assumes no responsibility for the information contained within this document. Responsibility for airworthiness of aircraft, including the installation of correctly selected approved replacement of parts lies with the aircraft owner/operator per FAR 91.163, FAR 121.363, FAR 123.45, FAR 127.131 and FAR 135.143 (a). Please refer to FAA or engine/airframe/propeller manufacturers’ parts listing for approved part numbers for each application.  Tempest brand products are manufactured by Aero Accessories, LLC.

Regulator Valves PDF Application Guide